Non Warping Glossy Black Polyimide Film

glossy black polyimide film

Glossy black polyimide film is homogenous opaque film, with glossiness achieving data 115 so so, own good mechanical, chemical, thermal performance.

Specification(thickness): 1mil-2mil

character:    

Good shielding

Non warping

Uniform color

Heat resistance

Flame retarding

Halogen-free,environment-friendly

Application:

High temperature tape, label

FCCL

Available thickness: 25um 50um

Technical requirements for polyimide film

1. appearance: smooth surface , no particles, bubbles and pinholes and impurity defects, edge neatly.

2. width is 520mm, some can reach 1040mm, splitting is available

3. thickness tolerance ?±10%

Brief introduction of polyimide film

The preparation method of the film is that: the polyamic acid solution is cast into a film, and after the stretching, the film is imidized at a high temperature. The film is yellow and transparent, a prominent high temperature, radiation resistance, chemical resistance and electrical insulation properties, long-term use in the air 280? or so.

Chemical properties of polyimide membrane

Polyimide film is high temperature resistant, chemically stable, fire retarding,. Typical polyimides are anti-chemical solvents such as hydrocarbons, esters, ethers, alcohols and chlorofluoroalkanes. They are also resistant to weak acids but are not recommended for use in more concentrated alkaline and inorganic acids environments