Multiport Gauge Valve

Vatac Valves (Quzhou) Corp is one of the best China multiport gauge valve manufacturers, welcome to wholesale cheap multiport gauge valve from our factory.

Multiport Gauge Valve

Compact Gauge Valve

Features

The compact gauge valve comes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, as standard, are rated to 413bar (6,000psi), but can be rated at 689bar (10,000psi) and are available in a range of different materials.

» Designed for use with Vatac pressure gauges with tube adapter end connections, the compact gauge valve enables easy dial alignment and reduces gauge installation time and cost. 

» Vatac tube fitting end connections reduce valve installation time and cost and provide robust tube grip and vibration resistance.

» An integral purge valve eliminates a threaded connection, reducing potential leak points. The purge cap is crimped permanently to the valve body for operator safety and to prevent accidental disassembly.

» 316 stainless steel construction offers durability and corrosion resistance.

Multiport Gauge Valve

Features and Benefits

Vatac Multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration of the main piping. For high-pressure applications, and metal seat version of the lightweight, compact instrument isolation valve. The standard configuration has a male or female inlet and three 1/2-inch FNPT outlet ports. All valves with male inlet connections are available threaded or prepared for welding and with either standard or extended inlets. 

» Cost savings are realized with multiport design by reducing the number of components and process penetrations required for multiple instrument installations. Possible leak points are decreased.

» Compact design requires minimum space for operation and installation. Lower valve weight increases strength at the process connection and reduces gauge whip.

» Long body configuration allows for a maximum of 4-inch [102 mm] pipe insulation.

» Roddable seat design is supplied

with replaceable seats, providing easy clean-out and seat replacement.

» Replaceable soft seat allows replacement of the soft seat insert without removing the valve from the line. It operates in dirty service with repetitive bubble-tight shutoff.

» Mirror stem finish burnished to a 16 RMS finish in the packing area enables smooth stem operation and extends packing life.

» Body-to-bonnet seal is metal-to-metal in constant compression below the bonnet threads. Prevents bonnet thread corrosion, eliminates possible tensile breakage of bonnet, and gives

a reliable seal point.

» Ball end stem eliminates seat galling, provides bubble-tight shutoff and long life. The hardened, non-rotating ball ensures perfect alignment closure.

» Packing below threads prevents lubricant washout, thread corrosion, and keeps solids from entering the thread area, which can cause galling. It also prevents process contamination.

» Adjustable packing adjusts easily Ð loosen jam nut, tighten bushing slightly, then retighten jam nut. Decreases packing replacement downtime and increases valve life.

» Dust cover prevents lubricant washout and keeps contaminants (dirt, rain, etc.) out of bonnet assembly.

» Safety back seating prevents stem blowout or accidental removal while in operation and provides a metal-tometal secondary stem seal while in the full open position.

» Chrome plating of 316 SS prevents galling or freezing of stem threads when similar metals mate. CS valves use a 303 SS stem.

» Rolled threads provide additional thread strength. The stem, bonnet, and male NPT threads are rolled, not cut.

» Bonnet lock pin is another safety feature which prevents the accidental separation of the bonnet from the body. However, normal valve maintenance and repair are still easily accomplished.