Hot Foil Heat Transfer AW-15

kenteer AW15 hot foil heat transfer sticker

1.33 $/sheet

use PU material ink, laser effect is very good,good coverage, non glue edge, it is similar with cutting,wash ability is good..Through SGS(seven) environmental certification(formaldehyde.?total leads content?the phthalates?The eight heavy metal?azo?organotin?PAH ).

1.Introduction:

use PU material ink, laser effect is very good,good coverage, non glue edge, it is similar with cutting,wash ability is good..Through SGS(seven) environmental certification(formaldehyde.?total leads content?the phthalates?The eight heavy metal?azo?organotin?PAH ).

2.Main specification:

(1)Material: imported high elasticity PU material ,metal sense is strong, high temperature resistance and wash ability is good.

(2)particular use imported PU material ,transparent reflective vinyl (reflect 150 degrees)can print many colors,silver vinyl (reflect 300degrees)can only print one color.

(3)Apply to high requirement fabrics ,such as shoes/caps/bags and so on.

3.Technology information:

(1)main material:imported PU material,hot foil vinyl

(2)The thickness of ink layer: 100-120um,including the film :150-200um,only one color silk screen printing .

(3)cold peeling ,reflective light

(4)Heat transfer requirement:temperature 150-160 degrees,time 6-12s/time,voltage:above 0.24kgf/cm^2.

(5)Wash requirement: home launder -ometer tested: 40 degrees, more than 20times,30 min/time.

(6)Size:31*50cm, or single package.

(7)Apply to traffic mark,or the night clothing(glow in dark) 

(8)Environmental certification:Through SGS(seven) environmental certification: formaldehyde?total leads content?the phthalates?The eight heavy metal?azo?organotin?PAH.

4.store/expiry date/package:

(1)Placed in cold place,ban crashing with sharp things.if you can't use up while open it,seal it otherwise it will go bad in rainy day or high temperature.

(2)Standard package:100peices/bag;500peices/case;or divided into single and package each one.(it is depended on customer)

(3)The expiry date is within 12 months.

5.Attention:

(1)try the simple then produce in massive.

(2)Seal the rest stickers,you should dry the products,don't let them in rainy day.

(3)This information is true and right,but it will change if customer offer the fabric/color/picture which is out of our control.we will take measure according to practice.

*PU:poly urethane

*PAH:poly cyclic aromatic hydrocarbon