Hospital Elevator

Fujihd hospital elevator manufacturer and suppliers in china, specialized in the research, development and production of hospital elevator.

1. Introduction

Hospital  elevator, for the transport of hospital bed, stretcher, medical car design elevator, the car has long and narrow characteristics.

A vertical lift, powered by an electric motor, is fitted with a box-like pod. Service on the fixed floor of the fixed lifting equipment. It has a car that runs between at least two vertical rigid rails.

2. Specification

3. Standard machine roomless hospital elevator Technical Data Sheet

Note:

the above for the civil diagram, detailed dimensions see construction plans, specific to the technical department to provide construction

drawings.

4. Application

Bed lift, common in medicine, is used to transport beds (including patients) elevator of medical equipment, mainly set up in the hospital, etc.

5. The hospital elevator control system is mainly functional specification:

? Full straight: in automatic driver running state, when the load in the car (usually 80 ? of rated load), the hospital elevator does not respond after the call outside the hall. However, the external call can still be registered at this time, and will be served at the next run time (single ladder), or by other services (group control).

? Lighting and fan power saving function: when the setting time is exceeded, there is no internal instruction and the call of the floor station, and the power supply such as lighting and fan is automatically cut off.

? Automatic correction: capsules hospital Elevators each run to the end station position, the system automatically according to the first level switch forced to slow down to check and correct the location of capsules, and auxiliary special forced slowdown deceleration eliminate crouch header and fault.

? Error order cancellation: the passenger can use the method of two consecutive press buttons to cancel the instruction of the last error registration in the control box.

? Reverse automatic cancellation: when the hospital lift is running to the terminal floor or the running direction changes, all reverse orders registered before this will be automatically cancelled.

? Repeat the door: after the elevator has been closed for a certain period of time, if the door lock is not closed, the hospital lifts will open automatically and then repeat the door.

? Outside the hall door: if there is no other instruction or outside call, if the cage stops at a certain floor and press the call button outside the floor, the cage door will open automatically.

? The closing button is closed in advance: the elevator is in the mode of automatic operation. When the door is open, it can close the door and close the door in advance to improve the efficiency.

? Open the door to hold the button: the elevator is delayed, and the goods can be transported easily.

If you are interested in any of hospital elevator would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.