Dust Removal Of Stirred Powder

The resistance of filter cartridge type dust collector increases with the increase of the thickness of dust layer on the filter media. When the resistance reaches a specified value, it is clear. When the PLC program control pulse valve opening and closing, the first chamber and enhance the valve closing, the filtration cutting off the air flow, and then the electromagnetic pulse valve is open, the compressed air and a short time in the box in the rapid expansion, into the cartridge, the cartridge expansion deformation vibration, and in reverse gas flow and erosion, attached to the filtration surface dust was spun off into the bucket. After the cleaning is finished, the solenoid valve is closed, the valve is opened and the chamber is restored to the filter state. The cleaning room is carried out in sequence, and the beginning from the first chamber to the next cleaning dust is beginning to make a cleaning cycle. Off the dust in the hopper through the ash unloading valve into the discharge.