C-9399 No Primer Required Alloy Varnish

  • Description
Product Detail

Fast Drying, Super Adhesion, Good Leveling, Scratch Resistance, Great Hardness, No Primer Required Alloy Varnish C-9399


HIGH EFFICIENCY VARNISH

C-9399 Alloy Varnish is a polyurethane paint specifically designed for alloy, steel and aluminum wheels. C-9399 Alloy Varnish provides a great finish and real protection for all standard and custom alloy materials. Alloy materials like Wheels take a beating both on and off the road from sand, salt, sun, brake dust and rocks which severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation. Careful preparation is essential to insure proper adhesion. C-9399 Alloy Varnish dries to the touch in 40 minutes and completely over night.


FIELDS OF APPLICATION

C-9399 Alloy Varnish have been approved by the automotive industry for both interior and exterior vehicle applications. The systems can also be used in any industrial sector where alloy composites have to be coated as economically as possible and where anything less than a high-quality surface finish is unacceptable.

C-9399 Alloy Varnish offer manufacturers of Wheel Rim composites an exceptionally attractive alternative to standard products thanks to their reduced processing time and resultant cost savings.


YOUR BENEFITS AT A GLANCE

*Economical processing: shorter processing times due to greater coat thickness per application and outstanding sanding property of each coat. Corresponding reduction in the number of applications required to obtain a perfect surface finish.

*Broad range of applications: RC-9399 Alloy Varnish suitable regardless of the size, geometry and thickness of components.

*Highly-resistant coating solutions: satisfying the specifications of various automotive and motorcycle manufacturers.

(interior and exterior uses)


PHYSICAL PROPERTIES

Specific Gravity0.96-1.0KG/L
Viscosity30-40S
IngredientsHydroxy acrylic resin, addition agents, solvents
ColourClear, free of extraneous matters

PROCESS


Mix Ratio
(by volume)

Varnish(C-9399): 2 parts

Hardener(CG-3297, CG-3298, CG-3299): 1 part

Thinner(CX-3097,CX-3098,CX-3099): 0.2~0.5 parts

Pot Life

4 hours@20?

Spray Gun & 
Air Pressure

Gravity type: 1.2~1.5mm, 3~4Pa

Suction type: 1.4~1.6mm, (Spray 60µm)

Spray Method

2-3 single coating to coverage (volatilization time of each

layer: 15 to 20 minutes)

Drying Time

24 hours@20?, 45 minutes@70?

Substrate

Steel, Wheel Rim, Alloy, Aluminum

Packaging

5L x 4 tins/ctn, 1L x 12 tins/ctn

Shelf Life

5 years



PRECAUTIONS

1.Keep it for 15 to 20 minutes after spray, and then bake it.

2.Keep the baking room dry when baking, otherwise the gloss will disappear.

3.Add 15‰ quick dry liquid for fast solidity.

4.Choose the right hardener according to the tempreture.

5.It is suitable to spray the whole car body.



CTVC-9399.jpg


Send your message to this supplier
To:  

Guangzhou Jinwei Chemical Co., Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity: