ASTMA A53 Black and Hot Dipped Zinc Coated Welded and Seamless Steel Pipe

  • Description
Product Detail

Scope:
Covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.

Materials and Manufacture:
The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.


Chemical Requirements:


Type S
(seamless)

Type E

Type F

(electric-
   
resistance welded)

(furnace-
   
welded pipe)


Grade A

Grade B

Grade A

Grade B

Grade A

Carbon max. %

0.25

0.30

0.25

0.30

0.3

Manganese %

0.95

1.2

0.95

1.2

1.2

Phosphorous, max. %

0.05

0.05

0.05

0.05

0.05

Sulfur, max. %

0.045

0.045

0.045

0.045

0.045

Copper, max.%

0.40

0.40

0.40

0.40

0.4

Nickel, max. %

0.40

0.40

0.40

0.40

0.4

Chromium, max. %

0.40

0.40

0.40

0.40

0.4

Molybdenum, max. %

0.15

0.15

0.15

0.15

0.15

Vanadium, max. %

0.08

0.08

0.08

0.08

0.08


Hot-Dipped Galvanizing:
Sets standards for coating of pipe with zinc inside and outside by the hot-dipped process. Weight of coating must not average less than 1.8 oz. per square foot and not less than 1.6 oz. per square foot.

Permissible Variations in Wall Thickness:
The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.

Permissible Variations in Weights per Foot:
Plus or minus 10%

Tensile Requirements:


Seamless and Electric-resistance-welded

Continuous-Welded


Grade A

Grade B


Tensile Strength, min., psi

48,000

60,000

45,000

Yield Strength, min., psi

30,000

35,000

25,000


Hydrostatic Testing: 

Hydrostatic inspection test pressures for plain end and threaded and coupled pipe are specified. Hydrostatic pressure shall be maintained for not less than 5 seconds for all sizes of seamless and electric-resistance-weld pipe.


Mechanical Tests Specified:
Tensile Test -- Transverse required on ERW for NPS 8 and large. Sending Test (Cold) -- STD and XS-NPS 2 and under XXS-NPS 1 1/4 and under.


Degree of Bend

Diameter of Mandrel

For Normal A53 Uses

90

12 x nom dia. of pipe

For Close Coiling

180

8 x nom dia. of pipe

Flattening Test -- NPS 2 and larger STD and XS. (Not required for XXS pipe.)

Lengths:

Standard Weight

Single Random -- 16' - 22'. 5% may be jointers. If Plain Ends -- 5% may be 12' - 16'.

Double Random -- Shortest Length 22', minimum average for order 35'.

Extra Strong and Double Extra Strong

Single Random -- 12' -22'. 5% may be 6' - 12'.

Double Random (XS and lighter) -- Shortest Length 22', minimum average for order 35'.

Lengths longer than single random with wall thicknesses heavier than XS subject to negotiation.


General Information:

Couplings -- Applied handling tight. Couplings, 2" and smaller straight tapped, other sizes taper tapped.

Thread Protection -- Applied to pipe 4" and larger.

End Finish (unless otherwise specified) --

STD or XS, or wall thicknesses less than 0.500 in. (excluding XXS): Plain and beveled

All XXS and wall thicknesses over 0.500 in.: Plain end square cut.

a53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless1


Diameter & Tolerance:
For pipe = NPS 11/2 [DN 40], the outside diameter at any point shall not vary more than 1/64 in. [0.4 mm].
For pipe =NPS 2 [DN 50], the outside diameter shall not vary more than ±1%.


Galvanized
1), Zinc: The zinc used for the coating shall be any grade of zinc conforming to Specification B 6
2), Weight of Coating—The weight of zinc coating shall be not less than 1.8 oz/ft2[0.55 kg/m2] as determined from the average results of the two specimens taken for test in the manner prescribed in 19.5 and not less than 1.6 oz/ft2[0.49kg/m2] for either of these specimens. And testing the weight of zinc according to ASTMB90


Common Uses:
- Low pressure systems
- Structural applications
- Mechanical components
- Bollards
- Casing

 



SUNRISE is well-known as one of the leading astma a53 black and hot dipped zinc coated welded and seamless steel pipe manufacturers and suppliers in China for its quality products and excellent service. We warmly welcome you to buy the quality and durable steel products from our factory.

Send your message to this supplier
To:  

Wenzhou Sunrise Import and Export Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity: