All Teflon Coated Heavy Duty Foam Gun Expanding PU Foam Applicator

  • Description
Product Detail

 

Model

Parts

Material

MJ10

Gun body

PP

Trigger

metal with polishing nickel plating

Adaptor

Zinc alloy

Handle

PP

Barrel

Iron with polishing nickel plating

Nozzle

Copper

Adjusting screw

steel


Product Description

Polyurethane Foam Gun 

Cheap Foam Gun; 

Comfortable Aluminum Handle; 

Individually Tested by Air Pressure; 

CE certification; 


                           Product details

                                  Factory

26.jpg

27.jpg

                                 Exhibition

                             Certification

28.jpg

29.jpg


Directions for use of the foam gun:

1,Take a can of gun foam and shake vigorously.

2,Screw can on to adapter of gun(not too tight).

3,Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam.

4,The foam gun i snow ready to use.

5,Foam output can be controlled with flow adjustment screw.

 

After use of the foam gun:

1,Leave gun filled with foam after use.Always keep a filled can of gun foam on the gun.

2,Tighten the flow adjustment screw completely.Do not empty the gun.Gun must always be filled with foam,otherwise foam is cured due to the humidity in the air.

3,Put can away in a vertical position(gun upwards).

 

Use foam gun again:

1,Shake the can vigorously(keep hold of the gun).

2,Remove cured foam at the tip of the nozzle carefully with a small,sharp knife.

3,Release the flow adjustment screw lightly and dispense foam immediately until the flow of foam  is correct.

4,The gun is now ready to use.

5,Foam output can be controlled with trigger of the gun.

 

Replacing of the can gun foam:

1,Check if the can is empty by dispensing foam in a dust-bin until no more foam is released.

2,Take a new can of gun foam.Shake vigorously.

3,Unscrew the empty can(keep valve opening away from you),remove released foam from adapter and replace the empty can immediately by a new one.

4,Dispense foam immediately to fill the extension tube.

 

Cleaning of the foam gun at times of interruption:

1,Unscrew the can of gun foam(keep valve opening away from you).

2,Take a can gun cleaner and screw the can on the gun.

3,Pull the trigger again to refill the gun with cleaner.

4,Cleaner has to remain in the gun for about 5 minutes.

5,Pull the trigger again to refill the gun with cleaner.

6,Unscrew the can gun cleaner.

7,Screw the can gun foam onto the gun.

8,Pull trigger of the gun again until foam is released and cleaner completely removed.

9,The gun is now ready to use.




Send your message to this supplier
To:  

Zhuji Meijiang Hardware Factory

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity:

You May Like