4ch CCTV Cat5 Power Video Data Combiner Balun (PVD304)

4ch CCTV Cat5 Power Video Data Combiner Balun (PVD304)

Description:
The Power Video Data Combiner Balun is passive transceiver device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. At the camera end the single channel PVD video balun combiner provides video, power and data on separate outputs. The PVD304 series is designed to be installed at the control room. Each camera power output is equipped with a self-resetting fuse for extra protection. The PVD304 video connections are through BNC connectors and Coax cables to the DVR. The data connections to the DVR are through RJ45 and Category-5 cables.

Features:
1. Combines video, power and data into a single RJ45 4-pair cable
2. Use with the power-video-data transceiver at the camera
3. Built-in passive transceivers with surge protection
4. 60 dB cross talk and noise immunity
5. Designed for structured wiring applications
6. Connectors: Video-BNC, UTP-RJ45, Data-Terminal Block
7. Built-in 12VDC5A for Camera, DVR, NVR…

Technical specifications:

Wire Type
The PVD system operates well with Cats or better UTP wire,24 AWG(0.5mm) or thicker.
Low voltage camera power video may be sent within same wire bundle.
Do not use shielded twisted-pair wire.
Do not use un-twisted wire.
Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals

Power-Distance Chart
Using PVD products, cameras can be powered at extended distances, please refer to the ctart below for more information.

All  RJ45 Connector follows industry-standard TIA/EIA 568B pinouts.

Application Diagram