10S Polishing Wheels

10S POLISHING WHEEL OF PRODUCT INTRODUCE:

 10S polishing wheel is produced by polishing powder, rubber binder and abrasive are mixed and generated after the reaction.The product has a diameters of 150mm and 130mm,Usually used in straight edge machine and bilateral machine for polishing.

10S POLISHING WHEEL OF ADVANTAGE:

High speed, High efficiency, Perfect surface finishing.

10S POLISHING WHEEL OF GENERAL PARAMETER:

SPECIAL PARAMETERS CAN BE CUSTOMIZED ACCORDING TO CUSTOMER NEEDS.

10S POLISHING WHEEL OF PICTURES AND DRAWING:

10S POLISHING WHEEL OF APPLICATION:

10S Polishing wheel is commonly used for polishing the glass which after grinding. Such as, construction glass, furniture glass, electronics glass, appliances glass, and bothroom glass,etc. Such as architectural glass doors and windows, glass table, glass rods, indoor screen glass,glass office partition wall, etc.

10S POLISHING WHEEL FOR APPLICABLE MACHINE:

straight edging machine,glass double edging machine.

10S is particularly suitable for bilateral and straight edge machine in the glass bottom edge polishing and edge chamfering. The diameter of 150mm 10S polishing wheel is often used to polish the bottom edge of the glass; diameter 130mm 10S polishing wheel commonly used in glass chamfer polishing.

Suitable for all the edging machine brand on the market,such as Deway,ZXM,BOTTERO?BAVELLONI?bovone,Schiatti angelo, etc.

THESE WHEELS CAN BE WORKED WITH TOGETHER:

Internal diamond grinding wheel, Continuous diamond grinding wheel,resin diamond grinding wheel,etc.

ATTENTION FOR USING POLISHING WHEEL:

1, Before using polishing wheel, you should better check the wheel is or not intact(Cracked, passivation).

2,According the process of “coarse polishing -medium polishing-fine polishing”, the wheel should be install in the correct position and suitable machine.

3,Water is very important in the using of diamond wheel to grinding, which not only can improve the working efficiency and prolongs the service life of polishing wheel.

4,To choose an appropriate speed is also important. Speed too fast, force too much, May cause damage to the grinding wheel, and even the operator injured.